Engineering :: Production Engineering
|
|
|
|
|
661. |
On a die accurate holes are to be drilled. Which machine would you prefer for this operation? |
A. |
Radial drilling machine |
B. |
Portable drilling machine |
C. |
Multi-pindle drilling machine |
D. |
Jig boring machine |
Answer: Option D
Explanation:
|
662. |
The efficiency of abrasive particles depends up |
A. |
purity |
B. |
uniformity in composition |
C. |
hardness |
D. |
All of the above |
Answer: Option D
Explanation:
|
663. |
Which of the following plate can be used for milling the sides of a hexagon nut? |
A. |
24 hole circle plate |
B. |
3 hole circle plate |
C. |
45 hole circle plate |
D. |
55 hole circle plate |
Answer: Option A
Explanation:
|
664. |
A gear is to have 14 teeth. Which of the following indexing movement can be used? |
A. |
3 complete turns on a 42 hole circle |
B. |
2 complete turns and 6 holes in 18 hole circle |
C. |
2 complete turns and 18 holes in 21 hole circle |
D. |
2 complete turns and 36 holes in 49 hole circle |
Answer: Option C
Explanation:
|
665. |
Broaching is primarily done for |
A. |
better finish |
B. |
mass production |
C. |
cylindrical jobs |
D. |
hard materials |
Answer: Option B
Explanation:
|
666. |
Which of the following drilling machine is used for mass production? |
A. |
Bench drilling machine |
B. |
Radial drilling machine |
C. |
Pistol drilling machine |
D. |
Gang drilling machine |
Answer: Option D
Explanation:
|
667. |
While using high speed steel tools, the cutting speed will be highest for which of the following steel? |
A. |
Mild steel |
B. |
Medium carbon steel |
C. |
Alloy |
D. |
Stainless steel |
Answer: Option A
Explanation:
|
668. |
While machining copper alloys with HSS tools, the cutting speed is |
A. |
20 to 30 m/min |
B. |
50 to 100 m/min |
C. |
100 to 150 m/min |
D. |
200 to 300 m/min |
Answer: Option D
Explanation:
|
669. |
The depth of cut depends on the |
A. |
curring speed |
B. |
rigidity of machine tool |
C. |
tool material |
D. |
all of the above |
Answer: Option D
Explanation:
|
670. |
Depth of cut is normally |
A. |
less for roughing operation and more for finishing operation |
B. |
more for roughing operation and less for finishing operation |
C. |
same for roughing as well as finishing operations |
Answer: Option B
Explanation:
|
Read more:
|
|